SS Braided Teflon Hose Manufacturer in India 

Hydrofit Engineers manufactures and supplies SS Braided Teflon Hoses for industrial applications requiring a flexible hose with good chemical resistance, temperature capability and reliable fluid transfer. These hoses combine a PTFE inner tube with external stainless steel wire braid, providing a practical solution for applications where conventional rubber hose may not be suitable for the operating media or temperature. 

Also known as SS Braided PTFE Hoses, these hose assemblies can be used for industrial fluids, chemicals, gases, oils and process applications after confirming compatibility with the actual media and operating conditions. 

Hydrofit Engineers supplies SS braided Teflon hose assemblies from Chennai to industrial customers across India, with hose size, length and end connections selected according to application requirements. 

PTFE Inner Tube with Stainless Steel Braid 

The performance of an SS braided Teflon hose comes from the combination of two different materials. 

The PTFE inner tube provides the internal flow path and is valued for its chemical resistance, low friction characteristics and ability to handle a broad range of industrial media when properly selected. 

An external stainless steel wire braid reinforces the PTFE tube and helps the hose withstand internal pressure while also providing external mechanical support. 

The complete hose assembly can then be fitted with suitable end connections according to the equipment, piping or process line. 

This construction makes SS braided PTFE hose distinctly different from both conventional rubber hydraulic hoses and SS Flexible Corrugated Bellow Hoses. 

Technical Specifications 

The actual working pressure should always be confirmed against the selected hose size and construction. Pressure capability can change as hose diameter increases and can also be affected by operating temperature and the end fittings used in the assembly. 

For this reason, we recommend avoiding one universal pressure rating across the entire product range. 

Why PTFE Is Used for Industrial Hose Applications 

PTFE is selected in hose applications primarily because of its resistance to a broad range of chemicals and its useful performance across demanding operating conditions. 

The smooth internal surface also provides a relatively low friction flow path and does not behave in the same way as many conventional elastomeric hose materials. 

This makes SS braided PTFE hoses suitable for applications where the characteristics of the media need to be considered carefully when selecting the hose material. 

However, PTFE should not automatically be described as suitable for every chemical or process. The actual media concentration, temperature, pressure and fitting material should be checked before the hose assembly is selected. 

Where SS Braided Teflon Hoses Are Used 

SS braided Teflon hoses can be considered for a variety of industrial fluid and process applications. 

Typical requirements can include chemical transfer lines, process equipment connections, industrial machinery, gas transfer, oils and lubricants, laboratory or instrumentation equipment and other installations requiring a PTFE fluid path. 

They can also be useful where operating conditions make a conventional rubber hose less suitable. 

For general hydraulic oil applications, Hydrofit also provides a range of Hydraulic Hoses designed for low, medium and high pressure hydraulic systems. 

SS Braided PTFE Hose vs SS Corrugated Hose 

Although both products use stainless steel braid, their internal hose construction is fundamentally different. 

An SS braided Teflon hose uses PTFE as the inner fluid carrying tube with stainless steel reinforcement around it. 

An SS flexible corrugated bellow hose uses a corrugated metallic inner hose, typically with stainless steel braid around the corrugated section. 

The choice between them therefore depends on the media, temperature, pressure, required flexibility, movement, installation arrangement and end connection. 

Neither product should be selected simply because it has stainless steel braid. 

End Connections and Hose Assemblies 

A hose performs as part of a complete assembly. The end connections therefore need to be selected together with the hose rather than considered separately. 

Depending on the available product configuration and customer requirement, an SS braided PTFE hose assembly can be supplied with suitable threaded or other industrial end connections. 

For applications involving bulk fluid transfer and frequent hose connection or disconnection, a suitable Camlock Coupling may also be considered where technically compatible with the hose, media and operating conditions. 

Other applications may require connections suitable for Hydraulic Fittings or process equipment. 

Information Required for Selecting the Right Hose 

For a more accurate hose selection and quotation, customers should provide: 

• Required hose ID or nominal size 

• Overall hose assembly length 

• Fluid, chemical or gas being transferred 

• Normal working pressure 

• Maximum operating temperature 

• Required end connection on both sides 

• Static or moving application 

• Material requirement for end fittings 

• Required quantity 

Chemical applications should include the exact media wherever possible rather than simply mentioning “chemical service.” Concentration and operating temperature can influence material compatibility. 

Similarly, a hose used continuously on moving equipment may have different requirements from one installed as a mainly static flexible connection. 

Installation Considerations 

Correct routing is important for the service life of a PTFE hose assembly. 

The hose should not be installed with unnecessary twisting, sharp bends or excessive stress close to the end fittings. Adequate length and a suitable bend radius should be maintained according to the selected hose construction. 

Where repeated movement is involved, the direction and frequency of movement should also be considered before finalizing the hose assembly. 

SS Braided Teflon Hose Manufacturer and Supplier in India 

With more than three decades of experience in industrial fluid handling products, Hydrofit Engineers supports customers with hydraulic hoses, hydraulic fittings, tubes, valves, couplings and related industrial components. 

For SS Braided Teflon Hose requirements, customers can share their hose size, media, working pressure, temperature, length and connection details. This helps identify an appropriate hose and end fitting configuration instead of selecting the assembly only by hose diameter. 

Hydrofit Engineers serves customers from Chennai and supplies industrial requirements across India. 

Frequently Asked Questions 

What is an SS braided Teflon hose? 

It is a flexible hose using a PTFE inner tube reinforced externally with stainless steel wire braid. It is also commonly referred to as an SS braided PTFE hose. 

Why is stainless steel braid used over PTFE hose? 

The braid reinforces the PTFE inner tube and supports the hose when it is subjected to internal pressure. 

Can SS braided PTFE hose be used for chemicals? 

PTFE is compatible with many industrial chemicals, but the exact chemical, concentration, temperature, pressure and end fitting material should be checked before selecting a hose assembly. 

Can different end connections be supplied? 

The end connection can be selected according to the equipment and application, subject to Hydrofit’s available hose assembly range. 

What details are required for an enquiry? 

Provide the hose size, length, media, working pressure, operating temperature, end connections and required quantity.